View STP25NM50N_38659.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB25NM50N/-1 - STF25NM50N STP25NM50N - STW25NM50N
N-channel 500V - 0.11 - 22A - TO-220 /FP- I2/D2PAK - TO-247 www..com Second generation MDmeshTM Power MOSFET
General features
Type STB25NM50N STB25NM50N-1 STF25NM50N STP25NM50N STW25NM50N VDSS (@Tjmax) 550V 550V 550V 550V 550V RDS(on) <0.140 <0.140 <0.140 <0.140 <0.140 ID
3
3
22A 22A 22A(1) 22A 22A
1
2
1
2
TO-220FP
3 1
TO-220
DPAK
3 12
1. Limited only by maximum temperature allowed
100% avalanche tested Low input capacitance and gate charge Low gate input resistancel
IPAK
TO-247
Internal schematic diagram Description
This series of devices is realized with the second generation of MDmeshTM Technology. This revolutionary MOSFET associates a new vertical structure to the Company's strip layout to yield one of the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters
Applications
Switching application
Order codes
Part number STB25NM50N STB25NM50N-1 STF25NM50N STP25NM50N STW25NM50N Marking B25NM50N B25NM50N-1 F25NM50N P25NM50N W25NM50N Package DPAK IPAK TO-220FP TO-220 TO-247 Packaging Tape & reel Tube Tube Tube Tube
January 2007
Rev 12
1/18
www.st.com 18
Contents
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
Contents
1 www..com 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................. 6
3 4 5 6
Test circuit
................................................ 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2/18
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
Electrical ratings
1
www..com
Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Value Parameter TO-220 - IPAK TO-220FP DPAK - TO-247 500 500 25 22 14 88 160 1.28 -15 -55 to 150 150 22 (1) 14
(1)
Unit
VDS VDGR VGS ID ID IDM
(2)
Drain-source voltage (VGS = 0) Drain-gate voltage (RGS = 20 k) Gate- source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor
V V V A A A W W/C V V/ns C C
88 (1) 40 0.32 2500
PTOT
VISO dv/dt (3) Tstg Tj
Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Peak diode recovery voltage slope Storage temperature Max. operating junction temperature
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD < 22A, di/dt < 400 A/s, VDD =80% V(BR)DSS
Table 2.
Symbol
Thermal data
Value Parameter TO-220 - IPAK TO-220FP DPAK - TO-247 0.78 62.5 300 3.1 Unit
Rthj-case Rthj-amb Tl
Thermal resistance junction-case Max Thermal resistance junction-ambient Max Maximum lead temperature for soldering purpose
C/W C/W C
Table 3.
Symbol IAR EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Ias, Vdd=50V) Value 10 350 Unit A mJ
3/18
Electrical characteristics
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
2
www..com
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol V(BR)DSS dv/dt (1) IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Drain source voltage slope Zero gate voltage drain current (VGS = 0) Gate-body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1mA, VGS = 0 Vdd=400V, Id=25A, Vgs=10V VDS = Max rating VDS = Max rating, @125C VGS = 20V VDS = VGS, ID = 250A VGS = 10V, ID = 11A 2 3 Min. 500 44 1 10 100 4 Typ. Max. Unit V V/ns A A nA V
0.110 0.140
1. Characteristic value at turn off on inductive load
Table 5.
Symbol gfs
(1)
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Total gate charge Gate-source charge Gate-drain charge Gate input resistance Test conditions VDS=15V, ID =11A VDS = 25V, f = 1MHz, VGS = 0 Min. Typ. 19 2565 511 77 315 84 11 35 1.6 Max. Unit S pF pF pF
Ciss Coss Crss Coss eq. (2) Qg Qgs Qgd Rg
VGS = 0V, VDS = 0V to 400V VDD = 400V, ID =22A, VGS = 10V, (see Figure 18) f=1MHz Gate DC Bias=0 Test signal level=20mV open drain
pF nC nC nC
1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 % 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDS
4/18
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
Electrical characteristics
Table 6.
Symbol
www..com
Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD =250V, ID = 11A RG = 4.7 VGS = 10V (see Figure 17) Min. Typ. 23 23 75 22 Max. Unit ns ns ns ns
td(on) tr td(off) tf
Table 7.
Symbol ISD ISDM
(1)
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 22A, VGS = 0 ISD = 22A, di/dt = 100A/s VDD = 100V, Tj = 25C (see Figure 22) ISD = 22A, di/dt = 100A/s VDD = 100V, Tj = 150C (see Figure 22) 460 6.9 30 532 8.25 31 Test conditions Min Typ. Max 22 88 1.3 Unit A A V ns C A ns C A
VSD (2) trr Qrr IRRM trr Qrr IRRM
1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %
5/18
Electrical characteristics
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
2.1
Figure 1.
www..com
Electrical characteristics (curves)
Safe operating area for TO-220 / DPAK / IPAK Figure 2. Thermal impedance for TO-220 / DPAK / IPAK
Figure 3.
Safe operating area for TO-220FP
Figure 4.
Thermal impedance for TO-220FP
Figure 5.
Safe operating area for TO-247
Figure 6.
Thermal impedance for TO-247
6/18
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N Figure 7. Output characterisics Figure 8.
Electrical characteristics
Transfer characteristics
www..com
Figure 9.
Transconductance
Figure 10. Static drain-source on resistance
Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations
7/18
Electrical characteristics
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N Figure 14. Normalized on resistance vs temperature
Figure 13. Normalized gate threshold voltage vs temperature
www..com
Figure 15. Source-drain diode forward characteristics
Figure 16. Normalized BVDSS vs temperature
8/18
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
Test circuit
3
www..com
Test circuit
Figure 18. Gate charge test circuit
Figure 17. Switching times test circuit for resistive load
Figure 19. Test circuit for inductive load Figure 20. Unclamped Inductive load test switching and diode recovery times circuit
Figure 21. Unclamped inductive waveform
Figure 22. Switching time waveform
9/18
Package mechanical data
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
4
www..com
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at:www.st.com
10/18
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
Package mechanical data
www..com
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
oP
Q
11/18
Package mechanical data
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
www..com
D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
1
12/18
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
Package mechanical data
TO-262 (I2PAK) MECHANICAL DATA
www..com
mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch
13/18
Package mechanical data
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
www..com
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
14/18
G
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
Package mechanical data
www..com
TO-247 MECHANICAL DATA
mm. MIN. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 0.140 0.177 0.216 14.80 4.30 0.560 0.14 0.728 0.143 0.216 TYP MAX. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 MIN. 0.19 0.086 0.039 0.079 0.118 0.015 0.781 0.608 0.214 0.582 0.17 inch TYP. MAX. 0.20 0.102 0.055 0.094 0.134 0.03 0.793 0.620
DIM. A A1 b b1 b2 c D E e L L1 L2 oP oR S
15/18
Packaging mechanical data
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
5
www..com
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
16/18
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
Revision history
6
www..com
Revision history
Table 8.
Date 30-Nov-2004 08-Mar-2005 22-Mar-2005 13-Apr-2005 28-Apr-2005 16-May-2005 17-Jun-2005 07-Sep-2005 05-Oct-2005 09-Nov-2005 14-Nov-2006 19-Jan-2007
Revision history
Revision 1 2 3 4 5 6 7 8 9 10 11 12 First release. Inserted curves Modified title Modified some values Modified some values on Table 7 Modified values on Table 6 Inserted new row on Table 5 Inserted ecopack indication Modified curves Figure 7, Figure 8 Modified Figure 10 New template, new value on Absolute maximum ratings Typo mistake on Table 6 Changes
17/18
STB25NM50N/-1 - STF25NM50N - STP25NM50N - STW25NM50N
www..com
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
18/18

▲Up To Search▲

Price & Availability of STP25NM50N

	To Download STP25NM50N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .